Mercedes-Benz X-Class 2017 Operating Instructions Manual page 89

Table of Contents

Advertisement

Windscreen wipers and windscreen washer system
86
If it is necessary to switch on the windscreen
wipers in dry weather conditions, always
operate them using washer fluid.
!
Intermittent wiping with rain sensor: due to
optical influences and the windscreen becom-
ing dirty in dry weather conditions, the wind-
screen wipers may be activated inadvertently.
This could damage the windscreen wiper
blades or scratch the windscreen.
For this reason, you should always switch off
the windscreen wipers in dry weather.
$ Windscreen wipers off
1
2
Ä Intermittent wipe, normal
3
Å Intermittent wipe, frequent
4
° Continuous wipe, slow
5
¯ Continuous wipe, fast
î Press briefly: single wipe (windscreen
:
wiper in position 1)/press and hold: wip-
ing with washer fluid
Replacing the windscreen wiper
blades
G
WARNING
If the windscreen wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm. There is a risk of
injury.
Always switch off the windscreen wipers and
ignition before changing the wiper blades.
!
Never open the bonnet if a windscreen
wiper arm has been folded away from the
windscreen.
Never fold a windscreen wiper arm without a
wiper blade back onto the windscreen.
Hold the windscreen wiper arm firmly when
you change the wiper blade. If you release the
windscreen wiper arm without a wiper blade
and it falls onto the windscreen, the wind-
screen may be damaged by the force of the
impact.
Mercedes-Benz recommends that you have
the wiper blades changed at a qualified spe-
cialist workshop.
!
Only touch the wiper blade on the wiper
arm. Otherwise, you could damage the wiper
blade.
Positioning the windscreen wiper arms ver-
tically
Using the combination switch, put the wind-
X
screen wiper into the ° slow continuous
wipe position.
As soon as the windscreen wiper arms are
X
vertical to the bonnet, switch off the ignition.
Fold the windscreen wiper arm away from the
X
windscreen.
Removing the wiper blades
Press and hold locking knob : and remove
X
the wiper blade in the direction of the
arrow ;.

Advertisement

Table of Contents
loading

Table of Contents