Table of Contents
Advertisement
+
Vehicle
Vehicle
*
System settings
System settings
Import/export data
Import/export data
To switch on: switch
X
tection
tection
on O.
Enter a four-digit PIN.
X
Re-enter the four-digit PIN.
X
If both PINs match, PIN protection is switched
on.
To switch off: switch
X
tection
tection
off ª.
Enter the four-digit PIN.
X
i
If you forget your PIN, you can have PIN pro-
tection deactivated at a Mercedes-Benz Ser-
vice Centre. Alternatively, switch off PIN pro-
tection by resetting your personal data.
Software update
Information on software updates
The following sources are available for updating
navigation maps:
Update source
Internet
External storage
medium, e.g. USB
stick
Carrying out a software update
To load a data medium:
X
insert the SD memory card
R
connect the USB data medium
R
The multimedia system checks the data
medium and shows a corresponding message
in the display.
If the map software matches the navigation
system and the current system software, the
multimedia system checks whether the map
data on the data medium is already installed.
Map data is not installed yet
In the display, you will see a comparison of the
version statuses of the map software data
medium and the map software installed on the
multimedia system. You can then update the
map software.
*
Activate PIN pro‐
Activate PIN pro‐
Activate PIN pro‐
Activate PIN pro‐
Update type
Navigation maps
Navigation maps
Multimedia system:
+
Navi
Navi
X
Select
Update
Update
or
Cancel.
Cancel
X
If you select
Update, the map data is installed.
Update
If you select
Cancel
Cancel, the map software is not
installed.
Remove the data medium.
X
If an activation code is required for the map
software, a prompt appears in the display
requesting the code to be entered.
Enter the six-digit activation code.
X
Select ¬.
X
The map software is installed. You will see a
message to this effect.
If you enter an incorrect activation code, the
prompt to enter the activation code appears
again. If the activation code is entered incor-
rectly three times, the prompt asking you to
enter the activation code appears after a time
delay. The time delay increases every time the
activation code is entered incorrectly, from
five minutes up to a maximum of five hours.
The map data is installed in the background.
You can use the navigation system during the
installation process and you can check the
status of the software update at any time.
Confirm the displayed update progress mes-
X
sage.
The last navigation display used appears.
To check the software update status
Multimedia system:
+
Navi
Navi
*
Options
Options
X
Select
Map version
Map
version.
X
When the installation process is successfully
completed, the
Map
Map update
pleted
pleted successfully.
successfully. Restarting
igation system...
igation system...
The navigation system is restarted. Any exist-
ing route guidance will be recalculated and
will resume using the new map data.
Confirm the message.
X
Remove the data medium.
X
The installation is complete.
Installation process with multi-DVD map
X
data: once the content of the first DVD has
been installed, a message appears prompting
you to insert the second DVD. Follow the
instructions on the multimedia system dis-
play.
To cancel the installation: remove the data
X
medium.
System settings
*
Map content
Map content
update has
has been
been com‐
com‐
Restarting nav‐
nav‐
message will appear.
135
Advertisement
Table of Contents
