Mercedes-Benz X-Class 2017 Operating Instructions Manual page 86

Table of Contents

Advertisement

Housing cover for dipped-beam head-
:
lamps/side lamps
Housing cover for main-beam headlamps/
;
turn signal lamps
Requirements:
main-beam headlamp/dipped-beam head-
R
lamp: light bulb type H7 55 W
side lamps: light bulb type WY21/5W 21 W
R
turn signal lamp: light bulb type WY21W
R
21 W
the lighting system is deactivated.
R
the bonnet is open (
R
Turn the corresponding housing cover :
X
or ; anti-clockwise and remove it.
Main-beam headlamp/dipped-beam
X
headlamp: turn the socket anti-clockwise
and pull out.
Turn signal lamp/side lamp: press the clips
X
on the socket together and pull out.
Pull the light bulb out of the socket.
X
Insert the new light bulb into the socket, so
X
that the base of the lamp is resting fully on the
bottom of the socket.
Main-beam headlamp/dipped-beam
X
headlamp: insert the socket and turn it clock-
wise.
Turn signal lamp/side lamp: insert the
X
socket.
Press on housing cover and turn it clockwise.
X
Replacing the light bulb of the turn sig-
nal indicator (LED headlamp)
Requirements
turn signal lamp: light bulb type WY21W
R
21 W
the lighting system is deactivated.
R
page 190).
Y
Replacing light bulbs
To change a bulb set in the left headlamp, turn
X
the steering wheel clockwise as far as it will
go. To change a bulb set in the right head-
lamp, turn the steering wheel anti-clockwise
as far as it will go.
The clearance in front of the cover in the front
wheel arch then becomes greater.
Remove the screws :.
X
Remove the screws ;.
X
Carefully prise out the cover in the wheel arch
X
using a suitable tool.
Reach under the cover in the wheel arch.
X
Turn cover = anti-clockwise and remove it.
X
Pull out the socket on the holder ?.
X
Pull the light bulb out of the socket.
X
Insert the new light bulb into the socket, so
X
that the base of the lamp is resting fully on the
bottom of the socket.
Do not touch the glass tube with your bare
X
fingers.
Insert the socket on the holder ?.
X
Position the cover = and turn it clockwise.
X
Carefully press down the cover in the wheel
X
arch.
Fasten the screws :.
X
Fasten the screws ;.
X
83
Z

Advertisement

Table of Contents
loading

Table of Contents