Table of Contents
Advertisement
Exterior lighting
80
Driver's and co-driver's seats occupied
u
Driver's, co-driver's and rear seats occupied
1
Driver's seat, co-driver's seat and rear seats
2
occupied, load surface laden
Driver's and co-driver's seats occupied and
3
use of the maximum permissible rear axle
load
Turn headlamp range controller to the posi-
X
tion appropriate to the vehicle load.
Operating the combination switch for
lights
:
Main-beam headlamps
Turn signal, right
;
Headlamp flasher
=
Turn signal, left
?
Requirements
The dipped-beam headlamps are switched
R
on.
To switch on the main-beam headlamps:
X
switch on the dipped-beam headlamps
(
page 79).
Y
Press the combination switch beyond the
X
pressure point in the direction of the
arrow :.
The main-beam indicator lamp comes on.
To switch off the main-beam headlamps:
X
move the combination switch back to its out-
of-use position.
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of the arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate permanently: press the combi-
X
nation switch beyond the pressure point in
the direction of the arrow ; or ?.
Switching hazard warning lamps on
and off
Press the : button.
X
Switching the loading area lighting on
and off
Advertisement
Table of Contents
