Table of Contents
Advertisement
Driving systems and driving safety systems
114
System limitations
The reversing camera will not function or will
only partially function in the following situations:
if there is heavy rain, snow or fog
R
if the light conditions are poor, e.g. at night
R
if the camera lens is obstructed, dirty or mis-
R
ted up
if the rear of the vehicle is damaged. In this
R
case, have the camera position and setting
checked at a qualified specialist workshop.
The field of vision and other functions of the
reversing camera may be restricted due to spe-
cial bodies or attachments on the rear of the
vehicle (e.g. bicycle rack).
Switching automatic operation of the
rear view camera on and off
The reversing camera is only an aid. It is not a
substitute for your attention to the immediate
surroundings. You are responsible for safe
manoeuvring, parking and pulling away. Make
sure that no persons, animals or objects are in
the manoeuvring range. Pay attention to your
surroundings and be ready to brake at all times.
Multimedia system:
+
Vehicle
Vehicle
X
Rear view camera
Rear view camera
gear
gear
Activate O or deactivate ª the function.
X
Views of the reversing camera
Observe the notes on the reversing camera
(
page 113).
Y
The following camera views are available in the
multimedia system:
Normal view
:
Yellow guide line at a distance of approx-
imately 4.0 m from the rear of the vehicle
*
System settings
System settings
*
Activation by R
Activation by R
White guide line without steering input, vehi-
;
cle width including the exterior mirrors
(static)
Yellow guide line for the vehicle width
=
including the exterior mirrors, at the current
steering input (dynamic)
Yellow lane marking the course the tyres will
?
take at the current steering input (dynamic)
Vehicle centre axis (locating aid)
A
Yellow guide line at a distance of approx-
B
imately 1.0 m from the rear of the vehicle
C
Red guide line at a distance of approximately
0.3 m from the rear of the vehicle
Bumper
D
The guide lines are shown when the transmis-
sion is in position k or when reverse gear is
*
engaged.
The distance specifications only apply to
objects that are at ground level.
Front warning displays
E
Vehicle symbol as PARKTRONIC measure-
F
ment operational readiness indicator
Rear warning displays
G
Advertisement
Table of Contents
