Individualisation; Commands - Mercedes-Benz X-Class 2017 Operating Instructions Manual

Commands

184
If a station list entry is not recognised:
save a speaker-dependent voice tag for the
R
station.
Say the Read Read out
R
mand.
press the ó button on the multifunction
R
steering wheel when the station you want is
read out.

Individualisation

Overview
Using individualisation, you can fine tune LIN-
GUATRONIC to your own voice and thus improve
voice recognition.
Individualisation can only be started when the
vehicle is stationary. After starting the session,
the system guides you through the training with
spoken instructions.
i
If individualisation is activated, it may affect
the voice-recognition quality of other users. If
individualisation impairs the voice-recogni-
tion quality of other users, switch it off.
Individualisation comprises two parts. You train
the system to recognise digits in the first part
and specific commands in the second part.
The system can be reset to the factory settings
at any time.
i
Individualisation does not need to be com-
pleted in full. Even training in the digits will
result in a significant improvement in the rec-
ognition rate. The training can be stopped
after the first part.
Commands
Telephone commands
Voice command
Help telephone Help telephone
Dial number Dial number
Save number Save number
Call <Name> Call <Name>
Read out phone book Read out phone book
out station station list list voice com-
Function
Reads out essential telephone voice commands
Dialling a phone number
Saves a phone number in the address book with a speaker-depend-
ent voice tag
Places a call by selecting a name from the address book
Reads out all the address book entries with phone numbers
Starting new individualisation
Press button Ø.
X
The vehicle menu appears.
Select System settings System settings
X
turning and pressing the controller.
A menu appears.
Select Linguatronic Linguatronic
X
ing the controller.
Select Start new Start new individualisation individualisation.
X
You will see and hear a prompt asking
whether you would like further information.
Select Yes Yes or No No.
X
If you select No No the first part of individuali-
R
sation begins.
If you select Yes Yes you will see and hear more
R
information.
At the end of the first part, a prompt will appear
asking whether you wish to begin the second
part.
Select Yes Yes or No No.
X
If you select No No individualisation will be
R
cancelled. The data from the first part is
stored automatically.
If you select Yes Yes the second part will begin.
R
Individualisation is completed at the end of
the second part.
i
You can cancel individualisation using
cel cel or delete using
sation sation and switch on or off using
alisation alisation on on.
by sliding 6,
by turning and press-
Can‐ Can‐
Delete individuali‐ Delete individuali‐
Individu‐ Individu‐