MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
4.13.2. Port Status
(For TCP-F)
When TCP F – TCP H are selected, the Port Status menu will appear as shown below in Figure 4-33.
Figure 4-33 : WebEASY
- Communication Ports (TCP)
®
Mode: Select mode for selected TCP Port, options are Control A and Newfor.
Figure 4-34 : TCP Port Mode
Enable: This control sets the conditions for enabling or disabling the TCP port. Set Port Enabled / Port
Disabled to manually enable or disable the port. Set GPI (1-8) Enables to trigger the selected TCP port to
enable with input from selected GPI. Set Tcp disables to disable Tcp port
Figure 4-35 : TCP Port Enable
Page - 27
Revision 1.0