Delete Article; Queue Articles - evertz MIO-CCE-4K/3G User Manual

The article called 'Test" will be placed at the end of the Text 2 output queue. The article will
be deleted after it is output 5 times.
^A1<sp>Test<sp>T2<sp>9999<sp>H<cr>
The article called 'Test" will have its repeat count change to indefinite. It will not be placed
into any of the output queues.
5.4.3.

Delete Article

This command allows the user to remove an article from all output queues. If the article is currently being
output, it will not be removed until it has been completely output.
Command: ^A4<sp>name<sp>k/d<cr>
Default:
k/d
last keep/delete status specified for the article
The parameter name identifies the name of the article.
The parameter k/d indicates whether the article will be deleted from memory or not.
Examples: ^A4<sp>Test<sp>D<cr>
The article called 'Test" will be removed from all output queues and deleted from memory.
5.4.4.

Queue Articles

This command will delete the entire specified output queue and replace it with the articles named (if any).
The user enters the names of the articles separated by <cr> in the order that they are to appear in the
output queue. The encoder continues to add articles to the queue until it receives a ^C. The article names
may be edited by using the ^H (backspace) and ^X (delete line) characters before the <cr> is input.
Command:
^A8<sp>tc<cr>
name<cr>name<cr>....name<cr>^C
Default: none
The parameter tc identifies the text channel number of the output queue the articles will be placed into.
The parameter name identifies the name of each article to be placed in the queue. If no article names are
given, the specified article output queue is cleared and no articles will be output in that data stream.
Example: ^A8<sp>T1<cr>TEST<cr>TEST2^C
Puts the previously defined articles named TEST and TEST2 into the output queue for Text
Channel 1.
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
Revision 1.0
MIO–CCE–4K/3G
Page - 63