Sdp Output Control; Namedropper (+Nde Option Only); Packet Configuration; Figure 4-26: Sdp Output - evertz MIO-CCE-4K/3G User Manual

MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming

4.11.4. SDP Output Control

SDP Output Processing: Selects enable or disable of SDP output processing.

Figure 4-26: SDP Output

SDP Output Line: Selects the line to be used for embedding SDP data. (From line 8 to 41)

4.12. NAMEDROPPER (+NDE OPTION ONLY)

Figure 4-27 : WebEASY

- Namedropper

®

4.12.1. Packet Configuration

DID: This slider control allows the user to adjust the data identifier word for the namedropper packet data.
SDID: This slider control allows the user to adjust the namedropper secondary data identifier.
Line: This slider control allows the user to adjust the line for namedopper packets to be inserted
MIO-CCE-AUX-IO Stream: This control allows the user to select which available AUX-IO stream to insert
namedropper data.

Figure 4-28: MIO-CCE-AUX-IO Stream

Page - 23
Revision 1.0