MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
4.3.
NETWORK MANAGEMENT
Figure 4-4 : WebEASY
- Network Management
®
4.3.1. Network Configuration
The network configuration section is used to configure network settings for the Control Main, Control Backup,
Data Port 1 & Data Port 2.
IP Address: Use this field to set the IP addresse of the selected network port, displays current IP if one has
been set.
Netmask: Use this field to set the netmask of the selected port, displays current netmask if one is set.
Gateway: Use this field to set the network gateway of the selected network port, displays current gateway
if set.
MAC Address: This field displays the MAC address of the currently selected network port.
Rx Bandwidth: This field displays the current receive bandwidth in Kbps of the selected network port.
Tx Bandwidth: This field displays the current transmit bandwidth in Kbps of the selected network port.
4.3.2. Magnum In-Band Control
This section displays the Magnum Control & Tally Multicast server IP for the main and backup Magnum
server.
Page - 10
Revision 1.0