Ip Output; Ip Output; Video (S2110-20) Ip Output (Not Used At Time Of Writing); Anc (S2110-40) Ip Output (Not Used At Time Of Writing) - evertz MIO-CCE-4K/3G User Manual

MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
4.8.

IP OUTPUT

Use the IP output menu to monitor & set IP settings for Video IP (not available at time of writing), ANC IP
(not used at time of writing) and GPIO/Serial to IP(if enabled, see ordering options for MIO-CCE-AUX-IO).
Settings for Video Path 1 or Video Path 2 are accessed separately by selecting the tab of the video path.

Figure 4-14 : WebEASY

- IP Output

®

4.8.1. Video (S2110-20) IP Output (not used at time of writing)

Multicast IP: Set the multicast IP address for video IP output.
Port: Set port for multicast IP address
Tx Bandwidth: Displays the tx bandwidth of video output in Kbps.
RTP Sequence Error Count: Displays a counter for RTP sequence errors.

4.8.2. ANC (S2110-40) IP Output (not used at time of writing)

MultiCast IP: Set the multicast IP address for ANC data output.
Port: Set the port for ANC output.
Tx Bandwidth: Displays bandwith being received for ANC output (in Kbps).
RTP Sequence Error Count: Displays the error count for RTP data packets.
Page - 17
Revision 1.0