Tcp Control; Figure 4-37: Tcp Port; Communication Ports - Tcp Control - evertz MIO-CCE-4K/3G User Manual

MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
Monitor: This field displays the connection status of the selected TCP.
CEA 608 Permission: This control enables or disables control CC permission for the selected serial port.
Allows CEA 608 control permission for CC1-CC4, TXT1-TXT4 & XDS
CEA 708 Permission: This control enables or disables control service permission for the selected serial
port. Allows control service control for services 01-16.

4.13.3. TCP Control

Figure 4-36: WebEASY - Communication Ports – TCP Control
®
IP Address: Set IP address for TCP port.
Netmask: Set netmask address for TCP port.
Gateway: Set gateway address for TCP port.
Login Enable: This control is used to enable telnet login (default value is disable)
Login: Telnet login username. Only valid if login enabled
Password: Telnet login password. Only valid if login is enabled.
Timeout: Controls duration (minutes) of inactivity before telnet session is terminated (1 min to 31 minutes)
TCP Port: Assigns a TCP Port value to MIO-CCE device ports F, G & H. (Ports 23, 24 & 26 available)

Figure 4-37: TCP Port

Port (F-H) Status: Displays the status of TCP ports F-H.
Page - 28
Revision 1.0