MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
4.7.
IP INPUT
Use the IP input menu to monitor & set IP settings for Video IP (not used at time of writing), ANC IP (not
used at time of writing) and GPIO/Serial to IP (if enabled, see ordering options for MIO-CCE-AUX-IO).
Settings for Video Path 1 or Video Path 2 are accessed separately by selecting the tab of the video path.
Figure 4-13 : WebEASY
- IP Input
®
4.7.1. Video (S2110-20) IP Input (not used at time of writing)
Multicast IP: Set the multicast IP address for video IP input.
Port: Set port for multicast IP address
Active Route: Displays the active route for video input.
Rx Bandwidth: Displays the Rx bandwidth for video IP input.
RTP Sequence Error Count: Displays a counter of RTP Sequence Errors.
Page - 15
Revision 1.0