Webeasy Configuration; Figure 4-1 : Webeasy; Login Menu - evertz MIO-CCE-4K/3G User Manual

4. WEBEASY
®
The MIO-CCE-4K/3G can be configured using the Evertz Web Interface. WebEASY
Ethernet and SNMP control protocols.
Login
After the MIO module has been installed into the Scorpion unit, and configured with the required network
address (See appropriate Scorpion Manual), it can be operated and controlled over a web browser. Type
the IP address of the control port of MIO-CCE-4K/3G module into your web browser.
Note: Computer must be on same subnet in order to have communication with the module.
Default login and password is "customer".
After logging in, the navigation bar shown in Figure 4-2 is used to navigate to the device configuration menus
that will be discussed in the following sections throughout chapter 4.
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
CONFIGURATION

Figure 4-1 : WebEASY

- Login Menu

®
Revision 1.0
MIO–CCE–4K/3G
operates using
®
Page - 7