Table of Contents
Advertisement
6.
UPGRADE PROCEDURES
6.1.
FIRMWARE UPGRADE
Using the WebEASY
on a web interface is the fastest and recommended way to load the firmware onto the
®
MIO-CCE-3G/4K modules.
On the top of the web page for the MIO-CCE-3G/4K modules, there is a button labelled Upgrade. The
Upgrade tab is used to check current firmware version and upload the latest firmware (Figure 5-1).
Figure 6-6-1 : WebEASY
Selecting the Upgrade tab, will take the user to Figure 5-2 where the current firmware version is shown.
Should the firmware version be outdated, the user needs to download the firmware image file.
Click choose file and browse to locate image file (Figure 5-3). Once selected, click open to advance to next
step. Click upgrade and watch progress bar for status. Once completed, the device will automatically restart.
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
- Upgrade Button on Top Menu Bar
®
Figure 6-6-2 : WebEASY
Revision 1.0
- Firmware Upgrade Menu
®
MIO–CCE–4K/3G
Page - 71
Advertisement
Table of Contents
