Error Messages - KaVo HealOzone 2130 C Instructions For Use Manual

Instructions for use HealOzone 2130 C
|
8 Troubleshooting

8.2 Error Messages

Malfunction
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
8.2 Error Messages
Note
Comprehensible error messages are not displayed. Only an error number is dis‐
played. Depending on the message, it may be possible to remedy the error yourself
or require sending in for servicing.
Cause
ERROR_ANZAHLBEHANDLUN‐
GEN
The maximum number of treat‐
ments permitted since the last ser‐
vicing has been exceeded.
ERROR_BEHANDLUNGSZEITEN
The threshold for accumulative
treatment times has been excee‐
ded.
ERROR_LCD
Monitor fault.
ERROR_TIMER
Quartz oscillator fault.
ERROR_TASTEN
Button error.
ERROR_FUSS
Footswitch error.
ERROR_CS
Check Sum (CS) program code er‐
ror.
ERROR_DATA
Data error in SRAM.
ERROR_FLUSS_MIN_ABGLEICH
Flow sensor error; minimum flow le‐
vel not reached during calibration.
ERROR_FLUSS_MAX_BETRIEB
Flow sensor error; maximum flow
level exceeded during operation.
ERROR_FLUSS_RICHTUNG
Flow sensor error; flow direction in‐
correct.
ERROR_FLUSS_OFFSET
Flow sensor error; offset error.
ERROR_SENSOR_KOMM
Sensor communication error.
ERROR_TEMPERATUR
Sensor temperature error.
ERROR_FEUCHTE
Sensor humidity error.
ERROR_12V_MIN
Voltage too low.
ERROR_12V_MAX
Voltage too high.
ERROR_12V_TRIGGER
Safety switch trigger function faulty.
ERROR_STROM_OFFSET
Offset for current above threshold.
Remedy
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
▶ Inform technical service.
53/57