Table of Contents
Advertisement
13. AUTOMATION SETUP
13.
AUTOMATION SETUP
The SR-1000 is able to control external devices using its automation interface. This can be used
to automate repetitive tasks for the cinema operator to prevent user error.
13.1. Automation setup for Server GPIO
The SR-1000 GPIO automation device settings can be configured using the steps below:
1. Under the Automation tab in the menu, click the Device sub-tab.
2. Under the
Device
3. Enter the device Name,
The output pulse width must be at least 100ms. If a different output pulse width is required, the
value can be entered in the
changes made.
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
INSTALLATION MANUAL
list on the left, select 'IMBGPIO'.
Input Min Pulse width
Figure 37: Server GPIO settings
Output Pulse Width
and
Output Pulse
Width.
setting. Click the
Save
button to save any
- 34 -
nd
December 22
, 2022
Advertisement
Table of Contents
