Installation
32
5.3 Install the Control Unit (Desktop Enclosure)
•
On the underside of the control unit (A) there are four support feet
(B), which are used to place the control unit on a flat surface.
•
On the underside of the control unit (A) there are four M6 threads
(D) at a distance of 57 x 57 mm, which can be used to attach the
control unit to a machine. The maximum thread depth is 8 mm.
•
A flange clamp piece Ø 30 mm or a foot clamp piece Ø 30 mm are
optionally available ex works, which serve to accomodate the
control unit (A)at the threaded holes (D). The clamping parts (C)
can be integrated in a pipe system Ø 30 mm.
D
Figure 12
Operating Manual
C
B
SPE II
A
11.20