Replace The Printhead (General) - Carl Valentin SPE II 106/12 Operating Manual

Maintenance and Cleaning
86

9.6 Replace the Printhead (General)

NOTICE!
The printhead (D) is preinstalled on a head plate (A) and
aligned at the factory.
A
G
Figure 24
A Head plate
B Plug connection signal
C Plug connection tension
D Printhead
E Focal line
F Guiding
G Knurled screw
CAUTION!
The printhead can be damaged by static electricity
discharges and impacts!

Ground your body, e.g. by wearing a grounded
wristband.

Do not touch the contacts on the plug connections (B,
C).

Do not touch the printhead (D) with hard objects or
your hands.
Operating Manual
B C
F E
SPE II
D
11.20