Table of Contents
Advertisement
SPE II
Unpack the
printing system
Scope of delivery
11.20
5
Installation
Lift the printing system on the bottom and remove the printing
system from the carton.
Check the print mechanics and control unit for transport
damages.
Check delivery for completeness.
•
Print mechanics.
•
Control unit with cable.
•
Connecting cable.
•
I/O accessories (mating connector for I/O).
•
1 transfer ribbon roll.
•
Empty core, mounted on transfer ribbon rewinder.
•
Printhead cleaning foil.
•
Documentation.
•
Printer driver CD.
NOTICE!
Retain original packaging for subsequent transport.
5.1 Install/Attach the Printing System at Machines
NOTICE!
Only trained and qualified technical personnel may carry out
mounting, maintenance and repair work in accordance to this
instruction.
CAUTION!
The printing system and the print media can be damaged by
moisture and water.
Set up the printing system only in a dry place protected
from sprayed water.
Set up the print mechanics on a level, vibration-free and air
draught-free surface.
Open the cover of print mechanics.
Remove the foam transportation safeguards near the printhead.
Operating Manual
Installation
29
Advertisement
Table of Contents
