General Cleaning; Clean The Transfer Ribbon Drawing Roller - Carl Valentin SPE II 106/12 Operating Manual

Maintenance and Cleaning
82
WARNING!
Risk of fire by easily inflammable label soluble!

When using label soluble, dust must be completely
removed from the printing system and cleaned.

9.1 General Cleaning

CAUTION!
Abrasive cleaning agents can damage the printing system!

Do not use abrasives or solvents to clean the outer
surface of the printing system.

Remove dust and paper fuzz in the printing area with a soft
brush or vacuum cleaner.

Clean the outer surfaces with an all-purpose cleaner.

9.2 Clean the Transfer Ribbon Drawing Roller

A soiled print roll can lead to reduced print quality and can affect
transport of material.
1. Open the cover of printing system.
2. Remove the transfer ribbon from the printing system.
3. Remove deposits with roller cleaner and a soft cloth.
4. If the roller appears damaged, replace it.
Operating Manual
SPE II
11.20