General Parameters; Password - Carl Valentin SPE II 106/12 Operating Manual

Function Menu
Print examples
Write log files to
memory card
76

8.12.6 General Parameters

Settings: Printout of all printing system settings such as speed, label
and transfer ribbon material.
Bar codes: Printout of all available bar code types.
Fonts: Printout of all available font types.
Starting with firmware version 1.70, the printing system logs different
events internally. In case of service, the error cause can be located
faster.
With this command, different log files are saved on an existing storage
medium (memory card or USB stick). After the 'Finish' message the
storage medium can be removed.
The files are in directory 'log':
LogMemErr.txt: Logged errors with additional information such as
date/time and file name/line number (for developers).
LogMemStd.txt: Logging of selected events.
LogMemNet.txt: Data latest send via port 9100.
Parameters.log: All printing system parameters in human readable
form.
TaskStatus.txt: Status of all printing system tasks.
The files LogMemErr.txt and LogMemStd.txt are written in circle, i.e.
old contents are overwritten. The entry logged last is marked with „---„

8.13 Password

With a password different functions can be blocked for the operator.
There are different applications with which such a password protection
can be used reasonably. To receive a most flexible password
protection, the printing system functions will be divided into several
function groups.
Because of these different function groups the password protection is
very flexible. The printing system can be adjusted best to its actual
order, as only certain functions are blocked.
Operating Manual
SPE II
11.20