Table of Contents
Advertisement
SPE II
Conditions for
installation place
Installation of
power supply
11.20
3
Operating Conditions
Before initial operation and during operation these operating
conditions have to be observed to guarantee save and interference-
free service of our printing systems.
Therefore please carefully read these operating conditions.
Shipment and storage of our printing systems are only allowed in
original packing.
Installation and initial operation of printing systems is only allowed if
operating conditions were fulfilled.
Initial operation, programming, operation, cleaning and service of our
printing systems are only recommended after careful study of our
manuals.
Operation of printing systems is only allowed by especially trained
persons.
NOTICE!
Carry out regular training courses.
The content of the training are the chapters 3 (Operating
Conditions), chapter 6 (Flat Type – Load Media), chapter 7
(Corner Type – Load Media) and chapter 9 (Maintenance and
Cleaning).
These indications are also valid for someone else's equipment
supplied by us.
Only use original spare and exchange parts.
Please contact the manufacturer with respect to spare/wear parts.
The installation place of the printing system should be even, free of
vibration and currents of air are to be avoided.
The printing systems have to be installed to ensure optimal operation
and servicing.
The installation of the power supply to connect our printing systems
has to be effected according to the international rules and regulations,
especially the recommendations of one of the three following
commissions:
•
International Electronic Commission (IEC)
•
European Committee for Electro technical Standardisation
(CENELEC)
•
Verband Deutscher Elektrotechniker (VDE)
Our printing systems are constructed according to VDE and have to
be connected to a grounded conductor. The power supply has to be
equipped with a grounded conductor to eliminate internal interfering
voltage.
Operating Manual
Operating Conditions
15
Advertisement
Table of Contents
