Omron LD-60 User Manual page 93

Callout
A
B
C
D
2. Mount the camera bracket to the camera enclosure base.
The bracket will only fit on the base one way.
Attach the camera bracket firmly to the base using 3 M4 x12 mm socket head screws.
You may need to use longer screws depending on the thickness of your mounting loc-
ation. Washers and lock washers are recommended, though not shown here.
13732-000 Rev J
Description
Camera Enclosure Base
Direction of Travel
Through Hole
Detail of Base Mounting Holes
A
B
Figure 6-4 Mounting the Camera Bracket (units are mm)
LD Platform Peripherals Guide
Chapter 6: Acuity Localization
Callout Description
E Note: Test Bracket is for Illus-
tration Only.
F Screw
G Note: Test Bracket is Shown for
Illustration Only. To Mount to
Your Own Location, See Detail
of Base Mounting Holes.
H Mounting Location
C
3x M4 x 12
D
93