Omron LD-60 User Manual page 62

5.3 Call/Door Box Configuration
Wired (Ethernet) + Interface + Status
This screen shows you the wired network interface status.
Wired (Ethernet) + Interface + Configuration
This screen lets you configure the wired network interface.
1. Enter an IP address for this call/door box.
Each call/door box is a node on the network, and needs its own IP address.
An explicit mask may be entered, but is not required.
2. Click Store Permanent to write the configuration change to flash.
The information panel will reflect the changes you made.
3. Put a temporary label on the front of the call/door box with its IP address.
This will be useful when you need to enter the IP address into MobilePlanner.
62
Figure 5-7 Wired Interface Status Screen
Figure 5-8 Wired Interface Configuration Screen
LD Platform Peripherals Guide 13732-000 Rev J