Omron LD-60 User Manual page 113

6. Click the dropdown arrow next to the Insert button on the Insert Map Tools toolbar and
click Advanced.
This will open the Advanced Insert dialog box.
7. Click Clear All, then select just the Light check box in the Advanced Areas section.
8. In Advanced Options, check the boxes:
Include user-created map items, i.e. non-data types
l
Retain overlapping items of the same type in the containing map
l
13732-000 Rev J
NOTE: If lights of different types are physically behind one another in the
environment it may be necessary to scan that space twice, once with just
each light type exclusively. This means that you would have to turn off
lights at one height, then scan, and repeat with only the other lights
turned on.
LD Platform Peripherals Guide
Figure 6-25 Region Tool
Chapter 6: Acuity Localization
113