Omron LD-60 User Manual page 94

6.3 Installation
Callout
A Camera Mounting Bracket
B Note: Test Bracket is Shown for
Illustration Only. To Mount to
Your Own Location, See Detail
of Base Mounting Holes.
The screws have to be inserted from inside your payload structure, through the payload
structure surface and camera enclosure base, and into the three clinched nuts in the bot-
tom of the camera bracket.
There is a sticker on the camera bracket that shows the direction of travel of the AMR.
See the following figure. Verify that the arrow on the sticker is pointing toward the front
of the AMR.
94
Description
Direction of Travel
Omron Adept Technologies, Inc.
4550 Norris Canyon Road
San Ramon, CA 94583
Acuity
Model
:
13700-000
P/N
:
Figure 6-5 Label on Camera Mounting Bracket
LD Platform Peripherals Guide
Callout Description
C Camera Enclosure Base
D Screw
13732-000 Rev J