Omron LD-60 User Manual page 137

2. Put the AMR upright, and re-install the side covers.
3. Plug the splitter cable (Mini-Fit Jr™, included) into the AUX PWR port on the upper rear
core.
4. Plug the sensor power connector into one branch of the splitter cable.
This can power one or two sensors.
5. Plug the RS-232 connector(s) into the upper front of the core.
The front sensor plugs into RS-232-1.
13732-000 Rev J
Figure 9-8 Upper Rear of Core, Showing AUX PWR Port
Figure 9-9 Upper Front of Core, Showing RS232 Ports
LD Platform Peripherals Guide
Chapter 9: High Accuracy Positioning System
137