5.3 Call/Door Box Configuration
Wireless (WiFi) + Interface + Configuration
This screen lets you configure the wireless network interface.
1. Change the static IP Address to fit your wireless network.
2. Click Store Permanent to write the configuration change to flash.
The information panel will reflect the changes you made.
3. Put a temporary label on the front of the call/door box with its IP address.
This will be useful when you need to enter the IP address into MobilePlanner.
Wireless (WiFi) + Link + Status
This shows the wireless link status.
64
Figure 5-12 Wireless Interface Configuration Screen
Figure 5-13 Wireless Link Status Screen
LD Platform Peripherals Guide
13732-000 Rev J