Omron LD-60 User Manual page 97

c. Connect the Ethernet cable to the camera.
d. Connect the 3x2 Mini-Fit Jr. power cable from the camera to the 3x2 Mini-Fit Jr.
power splitter cable (inside the payload structure).
e. Connect the Mini-Fit Jr. splitter to the core's AUX POWER port.
The splitter will leave one available Mini-Fit Jr. power connector available for
other uses.
f. Connect the Ethernet cable from the camera to the Auxiliary Ethernet port on the
core.
4. Attach the tube onto the base.
The threads at the bottom of the tube are coarse, and match the threads on the base. The
threads at the top of the tube are fine, and match the filter.
13732-000 Rev J
Figure 6-8 Hirose Plug
NOTE: If other peripheral items, such as the touchscreen interface,
also require the use of the Auxiliary Ethernet connection, then a fast
Ethernet switch will be required (user-supplied).
LD Platform Peripherals Guide
Chapter 6: Acuity Localization
97