Editing A Relay Host; Managing System Date And Time Settings - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
2 Click Add Relay Host on the options bar.
The Add Relay Host dialog is displayed.
3 In Relay Host, type the name of an external mail server to act as the mail
relay host for your system.
4 Click Submit (or click Cancel to display the Email Alerts page).
The Email Alerts page is displayed, and an Updated external email server
information dialog is displayed when successful.
5 Send a test message to verify that the mail relay host is working properly.
For more information, see "Sending a Test Message" on page 41.
6 Verify that all of the intended recipient email addresses received the test
email.

Editing a Relay Host

To edit an existing mail relay host for your DR4000 system:
1 Select System Configuration Email Alerts.
The Email Alerts page is displayed.
2 Click Edit Relay Host on the options bar.
The Edit Relay Host dialog is displayed.
3 In Relay Host, modify the relay host name as necessary.
4 Click Submit (or click Cancel to display the Email Alerts page).
The Email Alerts page is displayed, and an Updated external email server
information dialog is displayed when successful.

Managing System Date and Time Settings

If you need to manage date and time settings that are used by your system to
synchronize it with other DR4000 systems or clients running in your domain,
use the Edit option in the Date and Time page.
By default, the system has the following date and time settings as default
values in an initial system start up:
• Mode—select from two types: Manual and Network Time Protocol
(NTP).
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
44
Configuring the DR4000 System Settings