Chapter 3: Installing Array Components; Recommended Tools; Front Bezel (Optional); Removing The Front Bezel - Dell EMC PowerVault MD3820i Owner's Manual

Storage arrays
Hide thumbs Also See for EMC PowerVault MD3820i:
Table of Contents

Advertisement

Topics:

Recommended Tools

Front Bezel (Optional)

Physical Drives
RAID Controller Module
RAID Controller Module Backup Battery Unit
Power Supply or Cooling Fan Module
Control Panel
Backplane
Recommended Tools
You may need the following items to perform the procedures in this section:
● Key to the system keylock
● #2 Phillips screwdriver
● Wrist grounding strap
Front Bezel (Optional)

Removing the Front Bezel

1. Using the system key, unlock the front bezel (if locked).
2. Lift the release latch next to the keylock.
3. Rotate the left end of the bezel away from the front panel.
4. Unhook the right end of the bezel and pull the bezel away from the system.
Figure 8. Removing and Installing the Front Bezel
1. bezel
Installing Array Components
2. keylock
Installing Array Components
3
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emc powervault md3800i

Table of Contents