Adjustment Of Diff-Lock Wire; Adjustment Of Mower Stopper; Adjustment Of Wire To Hook Mower - Baroness LM180E Owner's Operating Manual

LM180E
Maintenance

Adjustment of Diff-lock Wire

Important
If the diff-lock seems ineffective when you
depress the diff-lock pedal, adjust the diff-lock
wire.
1. Make sure that the diff-lock pedal has
completely returned to its resting position.
2. Loosen the nut on the transmission side.
3. Loosen the adjustment bolt upward to
increase the wire tension.
4. Adjust the wire so that the diff-lock wire and
the diff-lock lever show a little play when the
lever returns to its resting position under
spring tension.
5. Tighten the nut and fix the adjustment bolt
completely.
3
2
4
Adjustment of Diff-lock Wire_001
1
2
3
4
5
6
Note:
You can also adjust the diff-lock wire on the
pedal side.
Page 5-22
1
5
6
4rnndz-001
Transmission
Nut
Adjustment bolt
Wire
Spring
Diff-lock lever

Adjustment of Mower Stopper

1. Lower the left and right mower units, then
engage the reel rotation lever.
2. Loosen the nut, then adjust the position of
the adjustment bolt so that the mower
stopper will be positioned at 90 degrees
against the frame.
3. Tighten the nut securely to fix the adjustment
bolt.
4. Make sure that the mower stopper will spring
back when you release the reel rotation
lever.
2
6
Adjustment of Mower Stopper_001
1
2
3
4
5
6
7

Adjustment of Wire to Hook Mower

Wire to hook the left / right mower
1. Loosen the nuts and move the adjustment
bolt toward the outside of the machine to
increase the wire tension.
2. Without gripping the clutch lever, raise the
right mower unit, then make adjustment so
that the hook metal fitting will be in touch
with the bottom of the hook and the wire will
have a small play.
3. Tighten the nuts and fix the adjustment bolt
securely.
4
1
7
90
5
3
gawfw2-001
Nut
Adjustment bolt
Mower stopper
Frame
Spring
Left mower lifting arm
Right mower lifting arm
Maintenance Work