Adjustment Of Brake - Baroness LM180E Owner's Operating Manual

Adjustment of Brake

Caution
If the brake is not applied effectively even if
you depress the pedal up to the stopper,
adjust the brake rod.
1. Pull the parking brake lever completely and
make sure that the brake is effectively
applied.
2. Loosen the lock nut.
3. Remove the cotter pin, washer and pin that
affix the brake pedal to the front of the brake
rod.
4. Screw in the nut on the front of the brake
rod, then temporarily affix the brake pedal to
the front of the brake rod using the pin.
5. Depress the brake pedal lightly, and adjust
the clearance between the pedal stopper
and brake pedal to 5 - 7 mm (0.20 - 0.28 in).
(If the clearance is larger than 7 mm (0.28
in), the brake may be damaged.)
6. Affix the brake pedal to the front of the brake
rod securely using the pin.
7. Tighten the lock nut to secure the front of the
brake rod firmly.
8. Make sure that the brake is not applied any
longer when you release the brake pedal.
Maintenance Work
Maintenance
1
6
5 - 7 mm
2
Adjustment of Brake_001
1 Brake pedal
2 Pedal stopper
3 Parking brake lever
4 Lock nut
5 Brake rod (front)
6 Cotter pin, washer, pin
7 Brake drum
LM180E
3
4
5
7
nfzln9-001
Page 5-21