Adjustment Of Parking Brake - Baroness LM180E Owner's Operating Manual

LM180E
Maintenance

Adjustment of Parking Brake

Caution
If the brake wire is cut, the machine will be
unable to stop.
If the brake wire is cracked or damaged,
replace it with a new one immediately.
Caution
If the parking brake is not sufficiently effective
when you pull the parking brake lever, adjust
the brake wire.
Important
Make sure that the brake is effective on
slopes and that it is not applied any longer
when you release it.
Adjust the parking brake system whenever
there is any abnormality.
Adjust the parking brake by the brake wire
adjustment bolt.
1. While pressing the push button, return the
parking brake lever to its resting position to
release the parking brake.
2. Loosen the nut on the parking brake lever
side.
3. Move the adjustment bolt toward the rear to
increase the wire tension.
4. Tighten the nut securely to fix the adjustment
bolt.
5. Make sure that the brake is applied properly
when you pull the parking brake lever, and
that there is no brake dragging when you
release the parking brake lever.
Page 5-20
1
Adjustment of Parking Brake_001
1 Parking brake lever
2 Brake wire
3 Nut
4 Adjustment bolt
5 Brake drum
Note:
You can also adjust the brake wire on the
transmission side.
3
4
2
4
3
5
ulabms-002
Maintenance Work