Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Baroness LM180
Summary of Contents for Baroness LM180
- Page 1 Technical Information Leaflet TIL: 022 LM180 Triple Mower Blade/Cut Adjustment...
- Page 2 BARONESS LM180 TRIPLE MOWER – BLADE/CUT ADJUSTMENT Before commencing any blade adjustments it is important that the cutting units are thoroughly cleaned and dry. To check that the blades are cutting correctly, use a strip of paper as shown. With the strip of paper held square to the bottom blade, rotate the cutting cylinder and see if the blades cut the paper.
- Page 3 Check the cut again by using a strip of paper as previously explained. Check both ends of the blades and not just in the middle. Once again please remember to never put your hand into the cutting cylinder. If the paper is still not cut correctly, repeat the blade lowering procedure as described above.
Need help?
Do you have a question about the LM180 and is the answer not in the manual?
Questions and answers