Reel Rotation Lever; Mower Unit Lifting Lever - Baroness LM180E Owner's Operating Manual

LM180E
Handling Instructions

Reel Rotation Lever

Caution
Set the reel rotation lever to the engaged
position immediately before mowing. At all
other times, be sure to leave the reel clutch
lever in the disengaged position.
Important
Slowly set the reel rotation lever to the
engaged position.
If the clutch is quickly engaged, the engine
may stall.
Important
Unless both left and right mower units have
been lowered all the way, you are not able to
operate the reel rotation lever.
When the reel rotation lever is tilted back, the
reel cutter (cutting cylinder) rotates.
When the reel rotation lever is tilted forward,
the reel cutter (cutting cylinder) stops rotating.
Reel Rotation Lever_001
1
A
B
Page 4-18
B
1
A
mh4pyw-023
Reel rotation lever
Rotation
Stop

Mower Unit Lifting lever

Left and Right Mower Units
Caution
Before raising or lowering the mower units,
make sure that there are no people around
the machine.
Important
If the reel rotation lever is set to "Rotation,"
you will be unable to raise the mower units.
To lower the left and right mower units,
squeeze the clutch lever and slowly move the
mower unit lifting lever down.
Left and Right Mower Units_001
1
2
To raise the left and right mower units, raise
the mower unit lifting lever slowly until the
hook metal fitting is secured by the hook.
Left and Right Mower Units_002
1
2
5zujec-001
Clutch lever
Mower unit lifting lever
1
5zujec-002
Mower unit lifting lever
Operation Method
1