Move; Parking Brake Lever; Traveling Operation; Towing Operation - Baroness LM180E Owner's Operating Manual

LM180E
Handling Instructions

Parking Brake Lever

Caution
Never park the machine on a slope.
Important
Be sure to release the parking brake before
driving.
It will result in the brakes malfunctioning.
The parking brake lever is located on the left
side of the seat.
To park the machine, pull the parking brake
lever completely.
To release the parking brake, press the push
button while lowering the parking brake lever
all the way to its resting position.
1
Parking Brake Lever_001
1
2
3

Move

Traveling Operation

Danger Danger
If the machine stops on a slope and the
engine can not restart, keep the change lever
set in the arbitrary position and use the foot
brake to move to a flat place.
Shifting the change lever to the "Neutral"
position will result in the machine running out
of control.
Page 4-20
2
3
n9dmld-001
Push button
Parking brake lever
Adjustment bolt
Caution
Under any circumstances drive the machine at
such a speed that you can stop it immediately
for emergencies.
Caution
Make sure not to touch rotating tires with your
hands or legs.
1. Make sure that all the mower units are
raised.
2. Start the engine.
"Procedure to Start Engine" (Page 4-13)
3. Shift the change lever in arbitrary position.
4. Depress the brake pedal, and release the
parking brake.
5. Release the brake pedal.
6. Slowly tilt the traveling clutch lever back to
set the "ON" position in the same way as half
clutch.
7. The machine starts traveling.
8. Slowly tilt the traveling clutch lever forward to
set to the "OFF" position.
9. The machine stops with the brake pedal
depressed.

Towing Operation

If the machine does not travel due to engine
trouble, etc., you can move it in the following
ways:
Pushing by hand
･
Towing (See the following instruction.)
･
1. Stop the engine.
2. Apply the parking brake.
3. Chock the wheels.
4. Secure the rope to the front part of the
frame.
1
Towing Operation_001
rd19dk-001

Move