Principal Tightening Torques - Baroness LM180E Owner's Operating Manual

LM180E
Handling Instructions

Principal Tightening Torques

Tightening Torque by Model
LM180E
Tighten the following bolts and nuts at the torque specified in the table.
For thread locking adhesive, apply a mild to high-strength thread locker (ThreeBond 1322 or
equivalent anaerobic sealant).
Portion
Front wheel
K0071000082
shaft
Fron
t Wheel mounting
K0000100252 Bolt, M10-25
whe shaft
el
Wheel K0000080202 Bolt, M8-20
Rea
r
Wheel K0010100252 Bolt, heat-treated M10-25
whe
el
Steering K1604120000
Handle K0010060202 Bolt, heat-treated M6-20
Transmission pulley K0010060152 Bolt, heat-treated M6-15
Bed knife
K0071001182
Mow
(Bottom blade)
er
unit
Front roller K0010100252 Bolt, heat-treated M10-25
Page 4-10
Code Part name
Bolt, with nipple hole
M12-15
Rod end, spherical bearing
LHSA12
Screw, heat-treated flathead
M10-16
Tightening Torque
N-m kgf-cm lb-in
371.13 - 318.64 -
36 - 40
407.92 354.04
295.71 - 256.68 -
29 - 38
387.49 336.34
142.76 - 123.91 -
14 - 19
193.74 168.17
591.43 - 513.36 -
58 - 76
774.97 672.68
530.24 - 460.25 -
52 - 67
683.20 593.02
71.38 - 61.96 -
7 - 9
91.77 79.66
71.38 - 61.96 -
7 - 9
91.77 79.66
295.71 - 256.68 -
29 - 38
387.49 336.34
591.43 - 513.36 -
58 - 76
774.97 672.68
Thread locking
adhesive
－
－
－
－
○
－
○
－
－
Tightening Torques