Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Baroness SUPER MOWER LM180B
Summary of Contents for Baroness SUPER MOWER LM180B
- Page 1 SUPER MOWER Lawn Mower Owner's Handling Manual SN13315 and onwards...
-
Page 3: Danger
Greeting Handling Manual Thank you very much for the riding-type triple lawn mower, Baroness Super Mower LM180B. This manual explains the method of correct handling, adjustments, and inspection of LM180B. Prior to use, carefully read this Handling Manual, as well as the separate Handling Manual for Engine to thoroughly understand the contents for safe, correct operation. -
Page 4: Table Of Contents
- 2 - Contents 5. Mowing Work .................8 DANGER 5-1 How to Operate ..............8 Handling Manual 5-2 Adjustment before Working ..........8 6. Method of Lapping ..............8 DANGER 7. Maintenance and Inspection of Portions ......9 Warning for Marks ..............1 7-1 Change of Engine Oil ............ -
Page 5: Danger
1. Safety Precautions DANGER Before operating, understand correct operating procedures and Do not put your hand or foot near the blade ③ safety precautions. reel cylinders when they are rotating. 1-1 Safety Check DANGER before Work The blade reel cylinders and ④... -
Page 6: Names Of Portionn
- 4 - 2. Names of Portions 3. Inspection before Use 3-1 Inspection of Engine Oil For details, see the separate Handling Manual for Engine. Check the engine oil at a flat place. Put in the oil gauge (without screwing it in) through the oil filter port to check that the oil level is between the two knurl lines on the gauge. -
Page 7: Inspection Of Fuel
Belts are installed as shown in Fig.4. (6 types; 8 in total) 3-3. Inspection of Fuel For adjustment of belts, refer to “4-11 Adjustment of Belt Tension.” When fuel is insufficient, supply lead-free gasoline for automobiles. 3-7. Inspection of Mowers The tank capacity is approx. -
Page 8: Operation Of Travelling Clutch Lever
- 6 - Operation of Travelling Clutch Lever 4-4 Operation and Adjustment of Diff-Lock Pedal If the pedal on the left is depressed, the differential device is locked to Pull the lever slowly to prevent Travelling clutch lever enhance linearity, thus preventing slipping. If the pedal play increases, sudden starting. -
Page 9: Operation And Adjustment Of Side Brake
The front wheel is provided to prevent the blade reel cylinder 4-8 Operation and Adjustment of Side Brake from damaging a convex portion of the lawn surface. It should not be grounded but should be raised 10-20mm. 1) Operation The side brake is located on the left side of the saddle. Pull it Rotary blade Roller Scale plate... -
Page 10: Adjustment Of Belt Tension
1) Things to be prepared (special-order products) ① Lapping machine ......Baroness RM20 ② Abrasive ........FEL-PRO Clover Reel Sharpening Compound (genuine product) ③... -
Page 11: Maintenance And Inspection Of Portions
2) Procedure 7. Maintenance and Inspection of Portions For details, see the Handling Manual of Lapping Machine. Before checking, clean the machine body. The parts of operating portions ① Bring the blade reel cylinder and the bottom blade into and consumables should be periodically maintained and replaced as slight contact with each other uniformly at right and left. -
Page 12: Change Of Mission Oil
- 1 0 - 7-3 Change of Mission Oil 7-6 Maintenance List Do maintenance earlier than the time shown below as necessary. The oil filling port is located at the top on the right side of the mission case. The drain port is located at the bottom on the right side of the Maintenance item Hourly 50H 200H Yearly... -
Page 13: Inspection For Long Storage
2) Engine 8. Inspection for Long Storage Name Robin EH30B For the engine, see the Handling Manual of Engine. Type Air-cooled 4-cycle vertical OHV type gasoline engine 1) Changing oil Total displacement 291cc Change the engine oil/mission oil, etc. Continuous rated output 7.8PS/1800rpm 2) Oiling Maximum output...
Need help?
Do you have a question about the SUPER MOWER LM180B and is the answer not in the manual?
Questions and answers