12.11. Lid Power Cut Off Switch - Colortrac SmartLF Ci40 Service Manual

12.11. LID POWER CUT OFF SWITCH

12.11.1 Safety Precautions

Ensure the power is completely disconnected from the scanner unit.

Ensure the scanner is positioned on a stable maintenance platform.

Follow chapter 10.3 to position the scanner in the maintenance position when required.
12.11.2 Tools

Medium pozi-drive screwdriver
12.11.3 Associated Part Numbers

P003125 Micro Switch Sub-A
12.11.4 Procedures
1. Remove the Right End
Cover as in chapter 11.2.
2. Remove the Cable Tray
Right Sub-A as described
in PCB Tray chapter 11.4.
3. Cut any tie-wraps holding
the cables together.
4. Remove the 'P' clip
nearest the right hand end
that is holding the cables to
the chassis.
Ci Scanner Service Manual
Page 74