13.2.
CONFIGURING THE MAIN BOARD
1. Go to support website and
download and install the Ci
Set Parameters Program
from the Ci page.
2. The program installs on the
PC, and can be located in
the C:\Program
Files\Colotrac\SetCiParamt
ers. Run the exe
3. Press the appropriate
button to set the Main
Board to either a Ci24 or a
Ci40.
4. Set the MAC address by going to
5. Run the setmac.exe, and
press 'Write Mac address'
to install the Ethernet MAC
settings that are unique to
the scanner.
www.colortracsupport.co.uk
login details (if un-known) available on request from support.
http://www.colortracsupport.com/setmac.zip
Ci Scanner Service Manual
Page 82