Main Roller - Colortrac SmartLF Ci40 Service Manual

12.7.

MAIN ROLLER

12.7.1 Safety Precautions

Ensure the power is completely disconnected from the scanner unit.

Ensure the scanner is positioned on a stable maintenance platform.
12.7.2 Tools

Small pozi-drive screwdriver

Medium pozi-drive screwdriver

Allen Key
12.7.3 Associated Part Numbers

P003356 Ci40 Main Roller Sub-A

P003523 Ci24 Main Roller Sub-A

P003319 Roller Shaft Pulley Sub-A

P003151 Main Timing Belt
12.7.4 Procedures
1. Press down on the locking
buttons on both ends of the
Lid Unit.
2. Lift the Lid Unit right back.
3. Remove Main Timing Belt
as in Chapter 12.1 'Main
Timing Belt'
4. Remove the roller shaft
pulley as in Chapter 12.2
Ci Scanner Service Manual
Page 65