Colortrac SmartLF Ci40 Service Manual page 18

4. Lower onto the stand.
5. Screw 2 x M5 securing
bolts through the stand into
the scanner to prevent the
scanner being pushed off
the stand while in the
maintainence poistion.
6. To return the scanner back
to its operating position,
first remove the 2 x M5
bolts securing it to the
stand.
7. Lift and rotate the scanner
back to it's normal position,
locating the feet into the
appropriate holes in the
stand.
8. Refit the securing bolts in
the scanner to prevent the
scanner being pushed off
the stand.
Ci Scanner Service Manual
Page 18