Roller Shaft Pulley - Colortrac SmartLF Ci40 Service Manual

12.3.

ROLLER SHAFT PULLEY

12.3.1 Safety Precautions

Ensure the power is completely disconnected from the scanner unit.

Ensure the scanner is positioned on a stable maintenance platform.
12.3.2 Tools

Medium pozi-drive screwdriver
12.3.3 Associated Part Numbers

P003319 Roller Shaft Pulley Sub-A

P003151 Main Timing Belt
12.2.4 Procedures
1. Remove left end cover as
in Chapter 11.1.
2. Remove Main Timing Belt
as in Chapter 12.1 'Main
Timing Belt'
3. Loosen the 2 x M4 screws
that are cramping the
pulley to the roller shaft
4. Pull the roller shaft pulley
off from the roller shaft,
making sure to remove and
retain the shaft key ready
for refit.
Ci Scanner Service Manual
Page 46