Transportation Procedures(Transportation By People) - Mitsubishi RV-2F Series Instruction Manual

2.2.2 Transportation procedures(Transportation by people)

Fixing plate
Fixing plate
Flange of base(A)
Fig.2-2 ： Transportation of robot arm (Transportation by people）
1) The robot be transported by one worker. Place the robot on a dolly, etc. and move it to the vicinity of the
installation site.
2) Raises the robot as supports the robot's left side by your body with having the flange of base (A) and the
lower section of elbow (B).
Please be sure to avoid holding the robot from the front/back side or by the cover because the robot may
tilt over and the cover may be damaged or dropped, which may lead to accidents.
3) When transporting the robot, do not apply force on the cover, or apply a strong impact on the robot
4) Remove the fixing plate after installing the robot.
CAUTION
Base
To prevent accidents, do not hold the robot from the front/back sides, or hold
covers that have no grips.
No.2 arm
Elbow
Lower section of
elbow(B)
2Unpacking to Installation
Mass: Approx. 21kg
CAUTION
注意
VORSICHT
Installation 2-8