Connecting Laser Marker; Connecting Head, Controller, Terminal Block - Panasonic LP-M Series Maintenance Manual

2-4 Connecting Laser Marker

WARNING

2-4-1 Connecting head, controller, terminal block

• For the connection of this product, use the dedicated cables attached to the product or the specified optional cables.
• Insert or pull the cables all the way in a straight line. Tilting and inserting the cable may cause a failure.
• A gasket is incorporated in the joint of each cable, which keeps the protection structure. The performance of the marker
head protection structure is ensured only when each cable is properly inserted all the way and each gasket is crushed.
„ LP-M200 / M205 / M500 / M505
Head
No. Description
Signal cable
q
Unit power cable
w
Laser gate cable (Only for LP-Mxxx-S type)
e
Output terminal
r
Input terminal
t
Interlock connector
y
Input connector for displacement sensor
u
Laser gate terminal (Only for LP-Mxxx-S type)
i
Lock ring : After inserting the connector, turn the lock ring to fix it.
o
• Prior to wiring and/or cable connecting work, ensure that all the power
switches are turned off. Otherwise, electrical shock may result.
o
o
ME-LPM-SSM-10
Controller
e
q
w
r
t
u
i
y
57