Lasing Position Check - Panasonic LP-M Series Maintenance Manual

2-3-6 Lasing position check

„ Dual pointer function
Dual pointer shows the rough indication of the work distance (distance from the head base to the marking surface). It
displays the red point emitted in oblique and the red circle emitted perpendicularly from the head. The distance where the
laser point is closest to the center of the circle represents the guide of the work distance.
Depending on the required marking quality or installation condition, the dual pointer may shows not always the appropriate
work distance. Confirm the marking quality with the work distance indicated by the dual pointer and adjust it accurately as
appropriate.
„ Guide laser function
The marking contents and marking field can be traced with the red guide laser. The marking work position can be adjusted
visually by using the guide laser function.
Dual pointer
• Use the dual pointer and guide laser only as the guideline. For obtaining the appropriate marking quality, fine adjust the
work position and setting position of the target object by checking the actual lasing results.
• Refer to Operation Manual of the laser marker for the guide laser and dual pointer details.
• The guide indication is stopped automatically after passing 1 minute from start-up.
• The dual pointer indicates the center of the marking field when Z is present in the base plane (work distance specified
value). If Z is outside the base plane, the dual pointer indicates the dot outside the center of the marking field.
56
Adjust the work distance
so that the dot is in the
circle inside.
ME-LPM-SSM-10
Guide laser