Wiring / Connecting Procedures And Terminal Arrangement - Panasonic SF4C Series Instruction Manual

2-5-3 Wiring / Connecting Procedures and Terminal Arrangement

Connect the mating cable (with connector on one end or connector on both ends) to the pigtailed type of this
device (emitter and receiver) according to the customer's application referring to the terminal arrangement
given below. In addition, in case of the cable type (emitter and receiver) as well, wire the cables according to
the customer's application referring to the terminal arrangement given below.
● When extending the cable, use the exclusive cable up to the total length of 40.5m or less (for each
emitter / receiver). Extending the cable longer than 40.5m may cause malfunction, which can result
in death or serious injury.
● In case of using the muting lamp, a total length should be 30.5m or less (for each emitter / receiver).
● When the synchronization + wire (orange) and synchronization - wire (orange / black) is extended
with a cable other than exclusive cable, use a 0.2mm
<Cable with connector on one end>
A side
<Terminal arrangement of A side>
Cable / Connector color
Emitter
Receiver Gray (with black line) / Black
<Reference>
● The connectors can be distinguished from their colors as follows:
Connector for emitter: Gray, connector for receiver: Black
● For details of the cable with connector on one end and the cable with connector on both ends, refer to "6-2 Options."
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Terminal No.
Gray / Gray
2
or more shielded twisted pair cable.
<Cable with connector on both ends>
A side
<Terminal arrangement of A side>
Color code
1 Pale purple
2 Brown
3 Pink
4 Yellow-green / Black
5 Orange
6 Orange / Black
7 Blue
8 (Shield)
9 Gray
10 Gray / Black
11 Yellow
12 Red
1 White
2 Brown
3 Black
4 Yellow-green
5 Orange
6 Orange / Black
7 Blue
8 (Shield)
9 Gray
10 Gray / Black
11 Sky-blue / White
12 Sky-blue / Black
Wiring
B side
<Terminal arrangement of B side>
Description
Interlock setting input
+V
Test input / Reset input
Auxiliary output
Synchronization +
Synchronization -
0V
Output polarity setting wire
Safety input 1
Safety input 2
Override input
Muting lamp output
Control output 2 (OSSD 2)
+V
Control output 1 (OSSD 1)
External device monitor input
Synchronization +
Synchronization -
0V
Output polarity setting wire
Large multi-purpose indicator input 1
Large multi-purpose indicator input 2
Muting input 1
Muting input 2
29