Connecting To A 100-Pin Lcc Socket - Renesas Emulation Probe M30850T2-EPB User Manual

M30850T2-EPB User's Manual

2.9.1 Connecting to a 100-pin LCC Socket

When connecting the emulation probe to a 100-pin LCC socket (Yamaichi Electronics Co., Ltd.: IC61-1004-051 etc.) on the
user system, following the procedure below.
(1) Attach the CN2 side of the M30850T2-EPB to the CN2 side of the M30800T-PTC.
(2) Attach the M30800T-PTC to the 100-pin LCC socket.
Figure 2.8 Connecting to a 100-pin LCC socket
Notes on Connecting the User System:
Take care not to attach the converter board in a wrong direction. It may cause a fatal damage to the emulator.
The small connectors of the M30850T2-EPB and M30800T-PTC are guaranteed for only 50 insertion/removal
iterations.
For purchasing the IC61-1004-051 or for technical information, contact Yamaichi Electronics Co., Ltd.
REJ10J1005-0200 Rev.2.00 April 1, 2007
M3T-FLX160-EPB
M30850T2-EPB
CN2 side
(1)
M30800T-PTC
(2)
100-pin LCC socket
No.1 pin
User system
CAUTION
2. Setup
Page 30 of 98